Titanium Flanges and pipe fittings
Titanium and its alloy machining components are widely used in all kinds of machines such as medical equipment and petrochemical equipment, etc.. We supply a variety of Titanium machining components such as pipe fittings, flanges, elbow, reducers, Tees
InquiryTitanium Flanges and pipe fittings
Titanium and its alloy machining components are widely used in all kinds of machines such as medical equipment and petrochemical equipment, etc.. We supply a variety of Titanium machining components such as pipe fittings, flanges, elbow, reducers, Tees, stub ends and fasteners, etc.. We can also manufacture products according to clients' drawings.
Application
Titanium flanges and pipe fittings can be used in cars, medical equipment and petrochemical equipment.
Available Flange Types: Slip on flange, Welding neck flange, Threaded flange (screwed flange), Plain flange, Blind flange (blank flange), Lap Joint flange, Socket welding flange.
1.Titanium Flange
Type | PL,SO,WN,IF,SW,Th,PJ/SE,PJ/RJ,BL,BL(S) | |
Specification | Size | DN10-600 NPS1/2"-24" |
Pressure rating | PN0.25MPa, PN0.6MPa, PN1.0MPa, PN1.6MPa, PN2.5MPa, PN4.0MPa, PN6.3MPa, PN10.0MPa, PN16.0MPa, PN25.0MPa | |
Class150,300,600,900,1500,2500 | ||
Sealing surface type | RF, FF, TG, MFM, RJ, etc. | |
Standard | ASME B16.5,ANSI B16.5,ASME B16.36,JIS B2220,DIN 2501-2656,HG20592-20635,etc. |
2: Titanium Elbow
Type | 45 Degree elbow 45E(L) 45E(S) | |
90 Degree elbow 90E(L) 90E(S) | ||
180 Degree elbow 180E(L) 180e(s) | ||
Others: 30Degree, 60Degree, 120Degree, etc. | ||
Specifications | Outer diameter | DN15-1200 NPS 1/2"-48" |
Wall thickness | 1-15MM Sch5s-Sch160 | |
Standard | ASTM B363, ASME B16.9, ASME SB363, ANSI B16.9 | |
Technique | Welded, Forged, Rolled, Seamless | |
Surface finished | Sand blasting, Polishing, Pickling | |
Quality control | 100% of the X-ray detection (RT) | |
100% of Surface penetrant inspection (PT) |
3: Titanium Reducers (Concentric, Eccentric)
Type | Concentric Reducer R(C) | |
Eccentric Reducer R(E) | ||
Specifications | Outer diameter | DN15-1200 NPS 1/2"-48" |
Wall thickness | 1-15MM Sch5s-Sch160 | |
Standard | Standard:ASTM B363, ASME B16.9, ASME SB363, ANSI B16.9 | |
Technology | Welded, Forged, Rolled, Seamless | |
Surface finished | Sand blasting, Polishing, Pickling | |
Quality control | 100% of the X-ray detection (RT) | |
100% of Surface penetrant inspection (PT) |
4:Titanium Tees (Straight, Reducing)
Type | Equal Tee (T/S) | |
Reducing Tee (T/R) | ||
Specifications | Outer diameter | DN15-600 NPS1/2 -24 |
Wall thickness | 1.5-8MM Sch5S~Sch160 | |
Standard | ASTM B363, ANSI B16.9 | |
Technology | hydro-bugling,hot-press forming,seamless and welded | |
Surface finished | Sand blasting, Polishing, Pickling | |
Quality control | 100% of the X-ray detection (RT) | |
100% of Surface penetrant inspection (PT) |
5:Titanium Stub Ends
Type | Long Pattern | |
Short Pattern | ||
Specifications | Outer diameter | DN15-1200 NPS 1/2"-48" |
Wall thickness | 1-15MM Sch5s-Sch160 | |
Standard | ASTM B363, ASME B16.9, ASME SB363, ANSI B16.9 | |
Technique | Welded, Forged, Rolled, Seamless | |
Surface finished | Sand blasting, Polishing, Pickling | |
Quality control | 100% of the X-ray detection (RT) | |
100% of Surface penetrant inspection (PT) |
6.Other Titanium pipe fitting
Caps, flingers, socket welding fittings, valves are available
1.Standard Exporting package.
2.Original package or neutral package.
3.According to clients'needs.
4.Shipped in10-35 days after payment.